Hpp-enterprises P4000 SAN Manuel d'utilisateur télécharger pdf (Page 17)

Example

In the following example, six separate network links are available to a XenServer host. Of these, two

are bonded for VM LAN traffic and two for iSCSI SAN traffic. In general, the procedure is as follows:

1. Ensure there are no VMs running on the particular XenServer host.

2. Select the host in XenCenter and open the Network tab, as shown in Figure 7.

A best practice for the networks is to add a meaningful description to each network in the description

field.

Figure 7. Select host in XenCenter and open Network tab.

3. Select the NICs tab and click the Create Bond button. Add the interfaces you wish to bond, as

shown in Figure 8.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 62 63

Pas de commentaire

Hpp-enterprises P4000 SAN Manuel d'utilisateur Page 17